400 X 200 Mount Can I Power 2 X 12" Subwoofers With A Mono Amp?

Can I power 2 x 12" Subwoofers with a Mono Amp? - 400 x 200 mount

Can the power of these exercises:


=== 2 x Kenwood KFC-W3011 12 "2400W PEAK

2 pieces 12 "Subwoofer 4 Ohm Voice Coil (2ohm or dual 4-ohm setting)
Stainless steel coated polypropylene cone with rubber
Power range: 50-400 watts RMS (1200 watts peak power)
Frequency response: 25-800 Hz
Sensitivity: 90 dB
Mounting depth: 6-3/4 "
Carpeted sealed box volume: 1.50 cu. ft


=== The mono amplifier:

POWER AMPLIFIER SOUND MAGUS X801

800W x 1RMS (1 Ohm, 14.4)
1RMS x 500 W (2 ohms, 14.4)
1RMS x 300 W (4 ohms, 14.4)

1 ohm stable.
Double Side PCB and SMD components.
Adjustable input level, LPF, Subsonic, the function of bass boost.
Advanced short circuit, overload, over heat protection.
Easy bridgeable with same amplifier.
Terminals difficult.
Optional wired remote.


RMS Power at 14.4V (into 1 ohm 50Hz THD + N \\ \\ \\ \\ \\ \\ \\ \\ \\ u0026lt, 2%) 820 Watt
RMS Power at 14.4 V (2 ohm 50Hz THD + N \\ \\ \\ \\ \\ \\ \\ \\ \\ u0026lt, 2%) 500 Watt
RMS Power at 14.4 V (4 ohm 50Hz THD + N \\ \\ \\ \\ \\ \\ \\ \\ \\ u0026lt, 1%) 300 Watt
180Hz adjustable LPF Frequency 40 ~
Subsonic switch: Yes
Subsonic frequency: 10 ~ 50Hz
Frequency response: 10 Hz - 180 Hz
Bass Boost Frequency: 55 Hz
Bass Boost Gain: 0 ~ 12 dB
Low pass filter: 2 4dB/oct
Subsonic filter: 12 dB / octave
Operating voltage: DC10V - 16V
Remote Control: Optional
High-plated, heavy duty terminal block connection
Short circuit, overload, overheating
Dimensions (WxHxD): 53mm x 228mm x280mm